february 2016 capacitors type: cc45 [sl characteristics, edc: 1kv to 6kv] disc type capacitors with lead high voltage ceramic capacitors cc45 series commercial grade, low dissipation at high frequency
(2/9) 20160219 / leaddisc_commercial_cc45_en.fm capacitors reminders for using these products before using these products, be sure to request the delivery specifications. safety reminders please pay sufficient attention to the warnings for safe designing when using these products. do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). before soldering, be sure to preheat components. the preheating temperature should be set so that the temperature difference between the solder temperature and product temperat ure does not exceed 150c. soldering corrections after mounting should be within the range of the conditions determined in the specifications. if overheated, a short circuit, performance deterioration, or lifespan shortening may occur. self heating (temperature increase) occurs when the power is turned on, so the tolerance should be sufficient for the set therm al design. do not use for a purpose outside of the contents regulated in the delivery specifications. the products listed on this catalog are intended for use in general electronic equipment (av equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. the products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. if you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) aerospace/aviation equipment (2) transportation equipment (cars, electric trains, ships, etc.) (3) medical equipment (4) power-generation control equipment (5) atomic energy-related equipment (6) seabed equipment (7) transportation control equipment (8) public information-processing equipment (9) military equipment (10) electric heating apparatus, burning equipment (11) disaster prevention/crime prevention equipment (12) safety equipment (13) other applications that are not considered general-purpose applications please refer to the guideline of notabilia for fixed ceramic capacitors issued by jeita(japan electronics and information techn ology association, eiaj rcr-2335). when designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng protection circuit/device or providing backup circuits in your equipment. reminders
(3/9) 20160219 / leaddisc_commercial_cc45_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. capacitors disc type capacitors with lead high voltage ceramic capacitors, commercial grade, low dissipation at high frequency features low dissipation factor, and decreased self-heating te mperature in the high frequency, and high voltage application. the rated voltage of 6kv series have been added the rated voltage of 3kv series. these products shall conform to rohs directive due to lead(pb) free of lead wire and internal solder material. compatible with halogen-free external resin coating. application for use in snubber circuit protection for power supplies part number construction please refer to p-5~8 about the product dimensions. operating temperature range the maximum operating temperature of 125c includes capacitor self-generated heat of up to 20c. the storage temperature range applies to after mlcc is mounted on board. package quantity overview of cc45 series cc45 sl 3ad 101 j y ? na series name temperature characteristics rated voltage nominal capacitance capacitance tolerance class lead type application classification internal code sl +350 to C1000ppm/c 3ad 1kv 030 3pf c 0.25pf g long lead n general use a halogen-free 3dd 2kv 220 22pf d 0.5pf n short lead 3fd 3kv 471 470pf j 5% v taping 3jd 6kv temperature characteristics temperature range operating temperature c storage temperature c sl C25 to +125 C25 to +125 type package quantity taping (pieces / box) bulk (pieces / bag) cc45 1000 1000 product compatible with rohs directive halogen-free rohs directive compliant product: see the following for more details related to rohs directive compliant products. http://produ ct.tdk.com/en/environment/rohs/ halogen-free: indicates that cl content is less than 900ppm, br content is less than 900ppm, and that the total cl and br conte nt is less than 1500ppm.
(4/9) 20160219 / leaddisc_commercial_cc45_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. capacitors overview of cc45 series recommended flow profile preheating peak natural cooling temp. time temp. time time t1 t1 t2 t2 t3 110c min. 30 to 60s. 260c within 10s. over 60s. natural cooling preheating soldering t2 t1 t: time t1 t2 t3 t: temperature
(5/9) 20160219 / leaddisc_commercial_cc45_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. capacitors cc45 type capacitance and dimensions temperature characteristics: sl (+350 to C1000ppm/c) rated voltage edc: 1kv * the part numbers are tdks standard specification products. the " ? " of the part number contains the lead type, g, n or v. please refer to the details of each shape is shown below. please refer to p-9 about the taping dimemsions. list of standard lead shapes dimemsions in mm ? tdks standard product is vertical kink. ? tdks recommendation is short lead type with the symbol n for bulk products. capacitance (pf) capacitance tolerance dimensions (mm) taping dimensions part no. d max. t max. f (applied to bulk) f (applied to taping) d 10 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad100jy ? na 12 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad120jy ? na 15 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad150jy ? na 18 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad180jy ? na 22 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad220jy ? na 27 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad270jy ? na 33 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad330jy ? na 39 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad390jy ? na 47 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad470jy ? na 56 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad560jy ? na 68 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad680jy ? na 82 5% 6.0 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad820jy ? na 100 5% 6.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad101jy ? na 120 5% 7.0 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad121jy ? na 150 5% 7.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad151jy ? na 180 5% 8.0 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad181jy ? na 220 5% 8.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad221jy ? na 270 5% 9.0 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad271jy ? na 330 5% 10.0 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad331jy ? na 390 5% 10.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3ad391jy ? na 470 5% 11.5 5.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3ad471jy ? na symbol g bulk/long lead symbol n bulk/short lead symbol v taping vertical kink 25min. 4max. d f d t 5 1 4max. d t f d 16 +1.5 C0.5 4max. d t f d
(6/9) 20160219 / leaddisc_commercial_cc45_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. capacitors cc45 type capacitance and dimensions temperature characteristics: sl (+350 to C1000ppm/c) rated voltage edc: 2kv * the part numbers are tdks standard specification products. the " ? " of the part number contains the lead type, g, n or v. please refer to the details of each shape is shown below. please refer to p-9 about the taping dimemsions. list of standard lead shapes dimemsions in mm ? tdks standard product is vertical kink. ? tdks recommendation is short lead type with the symbol n for bulk products. capacitance (pf) capacitance tolerance dimensions (mm) taping dimensions part no. d max. t max. f (applied to bulk) f (applied to taping) d 10 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd100jy ? na 12 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd120jy ? na 15 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd150jy ? na 18 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd180jy ? na 22 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd220jy ? na 27 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd270jy ? na 33 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd330jy ? na 39 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd390jy ? na 47 5% 5.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd470jy ? na 56 5% 6.0 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd560jy ? na 68 5% 6.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd680jy ? na 82 5% 7.0 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd820jy ? na 100 5% 7.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd101jy ? na 120 5% 8.0 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd121jy ? na 150 5% 8.5 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd151jy ? na 180 5% 9.0 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd181jy ? na 220 5% 10.0 5.0 5.01.5 5.0+0.8, C0.2 0.60.05 v1 cc45sl3dd221jy ? na 270 5% 11.0 5.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3dd271jy ? na 330 5% 11.5 5.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3dd331jy ? na 390 5% 12.5 5.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3dd391jy ? na symbol g bulk/long lead symbol n bulk/short lead symbol v taping vertical kink 25min. 4max. d f d t 5 1 4max. d t f d 16 +1.5 C0.5 4max. d t f d
(7/9) 20160219 / leaddisc_commercial_cc45_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. capacitors cc45 type capacitance and dimensions temperature characteristics: sl (+350 to C1000ppm/c) rated voltage edc: 3kv * the part numbers are tdks standard specification products. the " ? " of the part number contains the lead type, g, n or v. please refer to the details of each shape is shown below. please refer to p-9 about the taping dimemsions. list of standard lead shapes dimemsions in mm ? tdks standard product is vertical kink. ? tdks recommendation is short lead type with the symbol n for bulk products. capacitance (pf) capacitance tolerance dimensions (mm) taping dimensions part no. d max. t max. f (applied to bulk) f (applied to taping) d 10 5% 5.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd100jy ? na 12 5% 5.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd120jy ? na 15 5% 5.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd150jy ? na 18 5% 5.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd180jy ? na 22 5% 5.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd220jy ? na 27 5% 5.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd270jy ? na 33 5% 6.0 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd330jy ? na 39 5% 6.0 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd390jy ? na 47 5% 6.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd470jy ? na 56 5% 7.0 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd560jy ? na 68 5% 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd680jy ? na 82 5% 8.0 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd820jy ? na 100 5% 8.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd101jy ? na 120 5% 9.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd121jy ? na 150 5% 10.0 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd151jy ? na 180 5% 11.0 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd181jy ? na 220 5% 12.0 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3fd221jy ? na symbol g bulk/long lead symbol n bulk/short lead symbol v taping vertical kink 25min. 4max. d f d t 5 1 4max. d t f d 16 +1.5 C0.5 4max. d t f d
(8/9) 20160219 / leaddisc_commercial_cc45_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. capacitors cc45 type capacitance and dimensions temperature characteristics: sl (+350 to C1000ppm/c) rated voltage edc: 6kv * the part numbers are tdks standard specification products. the " ? " of the part number contains the lead type, g, n or v. please refer to the details of each shape is shown below. please refer to p-9 about the taping dimemsions. list of standard lead shapes dimemsions in mm ? tdks standard product is vertical kink. ? tdks recommendation is short lead type with the symbol n for bulk products. capacitance (pf) capacitance tolerance dimensions (mm) taping dimensions part no. d max. t max. f (applied to bulk) f (applied to taping) d 3 0.25pf 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd030cy ? na 5 0.5pf 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd050dy ? na 8 0.5pf 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd080dy ? na 10 5% 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd100jy ? na 12 5% 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd120jy ? na 15 5% 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd150jy ? na 18 5% 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd180jy ? na 22 5% 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd220jy ? na 27 5% 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd270jy ? na 33 5% 7.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd330jy ? na 39 5% 8.0 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd390jy ? na 47 5% 8.5 6.0 7.51.5 7.50.8 0.60.05 v2 cc45sl3jd470jy ? na symbol g bulk/long lead symbol n bulk/short lead symbol v taping vertical kink 25min. 4max. d f d t 5 1 4max. d t f d 16 +1.5 C0.5 4max. d t f d
(9/9) 20160219 / leaddisc_commercial_cc45_en.fm please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. please note that the contents may change without any prior notice due to reasons such as upgrading. capacitors cc45 type taping dimemsions ammo pack inner box size item symbol dimensions(mm) remarks v1 v2 body diameter d depends on the specification of each product. body thickness t depends on the specification of each product. lead-wire diameter ?d 0.60.05 0.60.05 pitch of component p 12.71.0 15.01.0 including the slant of body feed hole pitch p 0 12.70.3 15.00.3 excepting the tape splicing part feed hole center to lead p 1 3.850.7 3.750.7 feed hole center to component center p 2 6.351.3 7.51.3 lead-to lead distance f 5+0.8, C0.2 7.50.8 measuring point is bottom kink component alignment h 02.0 02.0 including the slanting body due to bending lead-wire tape width w 18.0+1.0, C0.5 18.0+1.0, C0.5 adhesive tape width w 0 10.0min. 10.0min. hole position w 1 9.00.5 9.00.5 adhesive tape position w 2 4.0max. 4.0max. adhesive tape do not stick out the tape bottom of kink from tape center h 0 16.0+1.5, C0.5 16.0+1.5, C0.5 height of body from tape center h 1 46.0max. 46.0max. lead-wire protrusion 1.0max. 1.0max. feed hole diameter d 0 4.00.2 4.00.2 total tape thickness t 0.60.3 0.60.3 including adhesive tape length of snipped lead l 11.0max. 11.0max. coating on lead c 4.0max. 4.0max. height of kink a 4.0max. 4.0max. measuring point is bottom kink spring action s 2.0max. 2.0max. p p 2 d p 0 d 0 ?d a h 0 w h 1 w 1 t h h s h 0 c l t w 0 w 2 fp 1 v1, v2 340max. 60max. 320max. dimensions in mm ? for more information about products with other capacitance or other data, please contact us.
|
